Nobody enjoys dealing with smoke, but we must take action if a fire damages our home. While covering smoke damage may appear to be the most challenging task in the world, particularly if large sections of your walls and ceilings have been damaged, this is a process that you can quickly complete on your own if you plan correctly.
Paint Over Smoke Damage in 4 Easy Steps
It is vital to learn more about a comprehensive plan and grasp what to do, and responding quickly is always preferable. Therefore, if this occurs in your residence, the following procedures should be followed.
DryCleaning
This is the initial stage in repairing smoke and fire damage, and it is one that most people find strange. Most people believe that cleaning with a damp cloth and a sponge is the best method, but it is critical to dry-clean everything. This will assist in removing the majority of stains and soot from the accident.
The most effective tool for cleaning walls and ceilings is a dry-cleaning sponge, which is affordable and readily available. The best aspect about these sponges is that they are typically chemical-free, ensuring the wellness of your home. Wipe the walls and ceiling with straight overlapping strokes, removing debris before commencing the cleaning process.
Wet Cleaning
After dry-cleaning your walls and ceiling and removing any debris and soot, wet-clean everything and observe the difference, again, you will require sponges, additional clothing, and protective equipment and gear that will not impair your health or expose you to dangerous substances.
The majority of people remove stains with powdered phosphate-based heavy-duty cleaners. Simply blend some of the powder with warm water and sponge it on your walls and ceilings, precisely as you did with the dry-cleaning. Finally, rinsing the area with clean water and allowing it to air dry is a good idea.
Priming
Priming is required before painting your walls or ceilings. Naturally, you must first remove all stains from your surfaces, as repainting would be futile if the spots remained visible. Simply ensure that many areas are covered with the primer, leaving only a clean surface, and you’re ready to begin.
Be confident when using a primer or painting a wall is your first time. Ensure that you apply an adequate amount of primer to prevent recurrence of the stains, but keep in mind that primers can be pretty pungent. That is why you must keep your windows open and, if you are in the kitchen, use your powerful fire duct to remove the odors before you become disoriented.
Repainting
After thoroughly cleaning and priming any damaged surfaces, it’s time to paint over the fire damage in your home. While this is the simplest step and may be completed in your sleep, it demands time and energy.
The critical decision is to repaint only the damaged areas or the entire space. Therefore, assess the extent of the damage and determine whether covering a small wall section is sufficient. If you are dissatisfied with the outcome, simply repaint the remainder of the room.
If the Damage Is Considerably More Severe, Consult a Professional
Following these steps, your home should begin to resemble what it looked like prior to the fire. Regrettably, the majority of cases of smoke damage are too severe for these methods to be effective. If smoke and soot damage persists, or if your property has experienced additional damage as a result of the fire, visit puroclean.com to contact a professional fire restorer to make your home appear brand new once again.
Conclusion
To avoid health dangers and further property damage, it is critical to clean black smoke and soot from walls properly. It is vital to begin cleaning smoke damage quickly following a fire since it can cause permanent staining, etching, and discoloration on walls and household goods and continue to corrode and destroy surfaces.